Reve SoilX – Warnings and Precautions for Soil Testing

The accuracy, reliability, and usefulness of the Reve SoilX soil analysis report depends onseveral key factors. It is critical that users follow these guidelines to ensure that the datacollected is representative and actionable but not always reliable for informed agriculturaldecision-making.

Warnings and Precautions

Media

Suggested text: If you upload images to our website, please avoid uploading images that include embedded location data (EXIF GPS).
Visitors to the website can download and extract any location data from images available on the site.

1.Ensure soil samples are collected from the correct locations within the farm asrecommended in the Reve guidelines. Avoid collecting from corners, bunds, orrecently treated areas unless specifically intended.

2.Maintain appropriate soil collection depth. Reve generally recommends collectingsamples at 15–20 cm depth for most crops. For deep-rooted crops, deeper profilesmay be needed.

3.Use clean, non-contaminated tools for collecting and handling samples. Dirty tools,bags, or containers may lead to skewed readings.

4.Maintain hygiene of the SoilX device and sensors. Wipe sensors gently with soft clothbetween samples.

5.Calibrate the SoilX analyzer regularly as per the guidelines issued by ReveAutomation. Uncalibrated devices may lead to significant variations.

6.Soil granule size should be consistent. Remove stones and large particles. Crushclumps gently. Avoid grinding wet soil.

7.If water is used for extraction or dilution, always use deionised/distilled water. Do notuse tap water, as it introduces unknown variables.

8.Soil-to-water ratio should be strictly followed as per the SoilX sample preparationprotocol. Typically, 1:1.5 (w/v) is standard for many optical-electrochemical analyses.

9.Avoid conducting soil tests during or immediately after heavy rainfall or irrigation, aswaterlogged soil can mask real-time nutrient levels.

10.Place the SoilX device on a steady, non-vibrating platform during testing. Movementcan affect sensor reading accuracy.

Terms and Conditions

Reve SoilX report accuracy will depend on the correct procedures followed during samplecollection (location, depth), handling, preparation, and the condition of the SoilX analyzer atthe time of testing. Results are indicative of the condition of the sample at the time oftesting and are subject to variation due to environmental conditions such as rainfall,irrigation, or soil disturbances.
Recommendations derived from the Reve SoilX report are general in nature. For accurateyield improvements and precision crop planning, it is strongly advised that farmers consultqualified agronomists or soil scientists who can contextualize these findings against real-world crop scenarios, seasons, and geography. Therefore, Reve SoilX doesn’t hold anyresponsibilities for any kinds of adverse effects, consequences, or not deriving expectedresults or outcomes from any of its testing reports.

Support and Contact

For technical assistance, calibration help, or soil data queries, please contact the ReveAutomation support team at: info@reveautomation.com

Legal Terms and Disclaimers (India)

The soil test results provided by Reve SoilX are for indicative and reference purposesonly. While best efforts have been made to ensure accuracy, Reve Soils and itsaffiliates disclaim any warranties, express or implied, including merchantability orfitness for a particular purpose and will not be responsible for any adverse effects,consequences or not deriving expected results or outcomes.

The interpretation and recommendations made in the SoilX report are not legallybinding and are not a substitute for expert advice. Farmers are advised to consultlocal agronomists and agricultural extension officers for final cropping or soilmanagement decisions.

Reve Soils shall not be held liable for any direct, indirect, incidental, special, orconsequential damages including but not limited to loss of crop yield, income, oragricultural investment, arising out of reliance on the SoilX results.

Reve SoilX is not a regulatory or certification tool under any Indian agricultural bodysuch as FCO (Fertilizer Control Order), BIS, or ICAR guidelines. It is a digitaldecision-support tool that complements, not replaces, traditional soil laboratory tests.

By using the SoilX device and its reports, the user agrees that the testing wasconducted under their own conditions and acknowledges that variations in soilsample collection, preparation, and handling can affect result accuracy wherebyReve SoilX shall not be made responible for anything.

Reve Soils retains the right to update or revise its algorithms, report formats, orsensor specifications without prior notice.

Any disputes arising out of the use of the SoilX device or its reports shall be subjectto the jurisdiction of the courts in Ahmedabad, Gujarat, India.

Reve Automation and its partners are committed to the responsible use of agriculturaltechnology and encourage the ethical sharing of field data only with proper consentof farmers and stakeholders.

All trademarks, patents, technologies, and product names used in Reve SoilX are theintellectual property of Reve Automation Private Limited. Unauthorized copying ormisuse of device software, design, or interpretation logic is subject to prosecutionunder Indian IPR laws.

For any grievances or dispute resolution, please contact the designated grievanceofficer at: legal@reveautomation.com.